Molift Mover 180



Molift Mover 205
Molift Mover 205 is a flexible all-round lifter for all lifting and moving situations in the home, care institutions and hospitals.
Molift Mover 205 lifts from the floor without adjusting the height of the column and has an excellent lifting height. Its lightweight, low chassis and wheel positioning make the Molift Mover 205 easy to maneuver. The lifting capacity is 205 kg. All Molift passive patient lifts are supplied with a 4-point suspension as standard. Used together with a Molift sling, this provides a comfortable and correct positioning from lying to sitting and vice versa
Flexible in use
Molift Mover 205 can be supplied with optional suspension units which can be quickly and easily exchanged with a rapid connection system. Walking arms and scales are also available. Molift Stretcher can be used directly on the standard 4-point suspension. Molift Mover 205 is optional with an extra low base, only 6 cm. 
 Like all Molift passive patient lifts, Molift Mover 205 is delivered with automatic service notification and can be used with all passive Molift slings designed for 4-point suspension. The lifters are powered by environmentally friendly "green" batteries.

Transfer from wheelchair to toiletchair
Products: Molift Mover 205 & Molift Easy Toilet Sling

Specification Weight Capacity 21 stone 6lbs (136kg) Maximum Speed 4mph or 6mph with lights Ground Clearance 6.9cm (battery tray) Overall Length 81.86cm (without leg rests) Overall Width 61.97cm Turning Radius 52.1cm (20.5") Standard Controls NE+ / QLogic 3 Total Weight (without batteries) - Battery Requirements Seating TB Flex & TB3 Seating Tyres - Notes 1. Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. 2. Specification varies with user weight, terrain, battery type, battery condition and tire pressure. 3. Battery weight may vary based on manufacturer. Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%. The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice.

Condition New


Write a review